What is the cause of the abnormality in the motor bearing temperature regulation?
The motor bearing temperature regulation stipulates that the maximum temperature of the rolling bearing does not exceed 95 ◦C. The maximum temperature of the sliding bearing does not exceed 80 ◦C., And the temperature rise does not exceed 55◦C (temperature rise is the bearing temperature minus the ambient temperature during the test); see HG25103-91 for reasons and treatment of excessive bearing temperature rise:
(1) Cause: The shaft is bent, and the centerline is not allowed.
Handle; find the center again.
(2) Reason: The basic screw is loose.
Handling: Tighten the foundation screws.
(3) Reason: The lubricating oil is not clean.
Treatment: Replace the lubricant.
(4) Reason: The lubricating oil has been used for a long time and has not been replaced.
Treatment: Wash the bearings and replace the lubricant.
(5) Cause: The ball or roller in the bearing is damaged.
Handling: Replace the new bearing.
According to the national standard, the F-class insulation B-level assessment, the motor temperature rise is controlled at 80K (resistance method), 90K (component method). Considering the ambient temperature of 40 degrees, the maximum operating temperature of the motor should not exceed 120/130 degrees. The bearing temperature is up to 95 degrees. An infrared detecting gun measures the temperature of the outdoor surface of the bearing. In practice, the maximum temperature of the 4-pole motor cannot exceed 70 degrees. For the motor body, no monitoring is required after the motor is manufactured, in general, his temperature.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Mobile: +86.137.0604.0131 E-mail: firstname.lastname@example.org