Washing machines can be divided into a cold water pressure washer and a hot water pressure washer.
The washing machine with a hollow shaft motor can be divided into cold water high-pressure washers and hot water high-pressure washers. The cold water high-pressure washer is that the incoming water is normal temperature, and the discharged or normal temperature only deals with the water pressure. There is no treatment for the temperature. The water jet is heated to reach the specified temperature so that the high-temperature and high-pressure water flow can improve the cleaning ability. The hot water is divided into high-pressure hot water and high-pressure steam.
What kind of high-pressure washer is used for cutting metal? Generally, the ultra high-pressure washer is used for cutting metal. It is different from the ordinary high-pressure washer. The pressure of the water flowing out can reach 500 kg. The high-pressure nozzle is made of special materials. , Very hard and wear-resistant, the nozzle is a skinny hole because the pressure is 500 kg, the high-pressure water jet ejected has a powerful penetrating force, can cut metallic and non-metallic materials, and can even cut reinforced concrete material. This is a good choice for the cutting industry! Not only that, but the ultra-high pressure cleaner can also punch holes in these materials, greatly improving the cutting effect and quality.
Why does the pipeline high-pressure cleaner have a long period of time? The cleaning effect is not good? Any mechanical equipment will have certain problems when it is used for a long time. The pipeline cleaner is no exception. The most common problem is the pressure drop, and the cleaning effect is not good. Check the high-pressure water nozzle for serious wear and tear. If there is serious wear, replace it with a new one in time. In addition, check whether the water inlet pipe is clogged, or bent, or folded. Generally, this will cause the water inlet not to flow smoothly, which will affect the water output and cause uncleanness. The filter at the water inlet is also a wearing part. Check and replace if damaged. If the problem has not been solved, check the pressure regulator, relief valve, and internal seals. If you have any questions, please get in touch with the Clayson high-pressure washer manufacturer in time to get better after-sales service!
To ensure the safety of a high-power ultra-high pressure washer, when operating the equipment, carefully read the manufacturer's operating instructions of the ultra-high pressure washer. Each model of an ultra-high pressure washer is different. According to your model's instructions of an ultra-high pressure washer, it will help to operate safely and effectively.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Contact Person: Ms. Semmy Wu