Home News

How to effectively improve the efficiency of chemical pump operation?

China Fuan Zhongzhi Pump Co., Ltd. certification
China Fuan Zhongzhi Pump Co., Ltd. certification
Zhongzhi does really good on the design and manufacturing of the products. Experienced engineers service us very nice.

—— Vadim Zabiiaka

Good quality, great manufacturers, we are happy with your products.

—— Mr.Reuben kimwolo

Have been working together for more than 3 years very professional. all products work fine in our types of equipment. Thank you.

—— Mr.Yılmaz Türkoğlu

Thank you so much for Zhongzhi company to make our project run smoothly.

—— Mehmet Sefa KEÇİK

Technical issues resolved, reputation is very good.

—— Mr.ANTONIS GKANIS

I'm Online Chat Now
Company News
How to effectively improve the efficiency of chemical pump operation?
Latest company news about How to effectively improve the efficiency of chemical pump operation?

How to effectively improve the efficiency of chemical pump operation?


Work efficiency allows us to produce more results simultaneously, so the working efficiency of mechanical products is significant, then. For example, how can we improve the operating efficiency of chemical pumps by reducing the volume loss?


(1) Reduce the leakage loss in the pump, improve the machining accuracy and assembly quality of the parts, reduce the radial clearance of the front disc of the balance disc and the radial clearance of the front and rear seal rings and the vane seal ring, and reduce the liquid in the pump. Leakage from the high-pressure side to the low-pressure side causes pressure loss. For the impeller seal ring, the guide vane sleeve, the balance plate front throttle, and other components,  You should select the material with higher hardness and perform the heat treatment to improve the wear resistance.


(2) When starting the feed pump in an unconscious state, you should fully warm the pump according to the requirements of the regulations. If the warmth pump is not sufficient, the pump body will quickly generate a sizeable thermal temperature difference, which will cause the bow to deform. In addition, at this time, the pump is easy to make the internal seal gap. Thus, grinding can result in internal leakage and increased backflow volume loss.


(3) Carefully monitor the pump's axial turbulence and the discharge pressure change after the balance disc during operation. During the normal process, the pressure after the balance disc is larger than the pump's inlet pressure and should be repaired in time to reduce leakage. Loss and increase the volumetric efficiency of the pump.


(4) When adjusting the load, it should be stable, avoid the significant fluctuation of the water supply pressure, maintain the continuous and regular operation of the feedwater pump, and reduce the axial movement of the pump to avoid the wear of the seal gap.

 

Fuan Zhongzhi Pump Co., Ltd

 

registered the trademark "ZOZHI."

 

Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China

Tel:+86 0593 6532656 Fax: +86 0593 6531158

Mobile: +86.137.0604.0131 E-mail: sales@zz-pump.com

Website: www.zz-pump.com

www.electricmotorwaterpump.com

Pub Time : 2019-05-16 14:59:07 >> News list
Contact Details
Fuan Zhongzhi Pump Co., Ltd.

Contact Person: Ms. Semmy Wu

Tel: 05936532656

Fax: 86-0593-6531158

Send your inquiry directly to us (0 / 3000)