Payment & Shipping Terms:
|Product Name:||Peripheral Water Pump||Application:||Boosting|
|Head Max:||55M||Suction Max:||9M|
peripheral impeller pump,
domestic water pump
Peripheral Water Pump Description
The DB series vortex water pump with Electrophoretic coating can offer high pressure with comparatively low powers and have particularly steady operating curves. They are qualified in domestic fittings to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or hydrosphere units. For the correct function of the pump, use clean water or non-aggressive liquid only, without sand or other solid impurities.
Compared with spray paint, it has the following advantages.
1. Can obtain uniform film thickness
2. Good permeability, improve the corrosion resistance of the inner cavity of the workpiece
3. High safety, low pollution coating (paint), no fire danger
4. The appearance of the electrophoretic coating film is good, and it has good flatness when dried.
Peripheral Water Pump Application
These clean water pumps with peripheral impellers can provide relatively low power high pressures and have a particularly stable operating curve. Suitable for home, garden, hotel, and recirculating water pressure, municipal water supply and drainage, air conditioning water circulation, agricultural engineerings, such as irrigation, drainage and flooding, industrial water supply systems, fire protection systems, heating system water supply, and drainage, clean water transportation, etc.
Peripheral Water Pump Data ( 220V/50HZ )
|Q.Max (L/min)||H.Max (m)||
|Suction. Max (m)||Inlet/Outlet|
Peripheral Water Pump Construction
Pump Body: Cast iron
Mechanical Seal: Carbon
Frant Cover: Cast iron
Heavy-Duty Continuous Work
Motor Housing: Aluminum
Shaft: Stainless Steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
Construction and safety standards in compliance with IEC
220V/50HZ.60HZ 110V/50HZ.60HZ 220v.110v/50hz.60hz are available on request.
Peripheral Water Pump Use Precautions:
Before preparing to install the pump, first check whether the firmware of each part is loose or not. There is no foreign matter jam in the pump flow path to avoid the situation that it cannot be cleaned after the later installation. Next, check the water source and water level before use. The pump should be installed in a covered area or a closed environment for the pump to work properly. Avoid using pumped water or non-corrosive liquids, and no sand or other solid impurities.
|Transmission medium||Vortex Water|
|Pump body||Cast Iron|
|Stator&Rotor||1.Cold-rolled silicon steel sheet by high-speed punching machine. 2. 100% high-quality copper wire|
|Front cover||Cast Iron||Brass plate embedded to avoid impeller jam|
|Bearing||Chinese Best Quality Bearing||NSK, SKF, or on request|
|Mechanical seal||Graphene/Ceramic||Silicon Carbon|
|Shaft||Carbon Steel||Stainless Steel|
|Insulation||Class B||Class F|
|Voltage||220-240V Single Phase||On Request|
|Automatic Pressure Control System||No||Yes|
|Cooling Type||External Ventilation|
|Max. Suction lift||9M|
|Max. Fluid Temperature||+60℃|
|Max. Environment Temperature||+40℃|
|CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC|
Peripheral Water Pump GUARANTEE
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
1. Q: What’s the MOQ?
A: Trial sample order is ok.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: How can I get the pump?
A: Usually, we suggest express for samples. If the volume reaches 1m³, the Seaway will be better.
5. Q: What’s the warranty period?
A: 1 year.
Contact Person: semmy wu