Vadim ZabiiakaZhongzhi does really good on the design and manufacturing of the products. Experienced engineers service us very nice.
Mr.Reuben kimwoloGood quality, great manufacturers, we are happy with your products.
Mr.Yılmaz TürkoğluHave been working together for more than 3 years very professional. all products work fine in our types of equipment. Thank you.
0.35kw 0.5hp Hollow Shaft Hydraulic Motor
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||Hollow Shaft Motor||Voltage||230V|
|Frame||100||Material||Die Cast Aluminum|
|Protection||IP55||Installation||B3 B5 B14 B34 B35|
|IEC Standard||IE1||Application||Cleaning Machine / Pressure Washer Machine|
hollow shaft electric motor,
hollow shaft hydraulic motor,
hollow shaft electric motors 0.5hp
0.35kw / 0.5hp Single Phase Motors With Hollow Shaft 230 Volt 1400rpm
50Hz Electric Motor - B3 - Hollow shaft - Single Phase - 4Pole (1400 RPM)
|FRAME||FLANGE||FRAME NO||APPLICABLE PUMP MODEL|
|AR PUMP||HAWK PUMP||INTERPUMP|
|100||90mm||100L||RC - RR - RS - XT||NHD - NHDP|
|112||61/90mm||112M||XM - RK - RS-RC - RR|
Matters needing attention in motor maintenance and maintenance
During the long-term use of the motor, the user should pay attention to its maintenance and maintenance to improve the service life and better serve the mechanical equipment. Here are some issues to be noted in daily care:
Routine maintenance includes removing external dust and oil stains, monitoring unusual noises and regularly changing lubricants. The oil change cycle is generally 1kh for plain bearings and 5kh for rolling bearings.
Pay attention to environmental protection when maintaining and repairing the motor to avoid pollution in the maintenance site. For example, the motor coil must not be removed by fire. For motors that have been used for more than one year, pay attention to check whether the oil seals, shaft seal rings on the outside of the motor end cover, rubber seals on the junction box seat, junction box cover, etc. are cracked, deformed, severely worn, etc. The parts that cannot meet the sealing performance and requirements should be replaced in time.