1. Check whether the hot water high-pressure cleaner heater does not have a fuel level lower than the reference position;
2. The three-phase electric equipment checks whether the exhaust fan direction is reversed;
3. The heater The gap between the two ignition electrodes should be suitable;
4. Check the temperature regulator in hot water high-pressure cleaner and do not close.
5. Check if the water level is too low.
6. Check the buoys, fuel level sensors, fuel solenoid valves, fuel tanks, fuel filters, etc., in the floating box of the equipment.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Contact Person: Ms. Semmy Wu