Home News

## What is the hydraulic loss of a centrifugal pump

Zhongzhi does really good on the design and manufacturing of the products. Experienced engineers service us very nice.

Good quality, great manufacturers, we are happy with your products.

—— Mr.Reuben kimwolo

Have been working together for more than 3 years very professional. all products work fine in our types of equipment. Thank you.

—— Mr.Yılmaz Türkoğlu

Thank you so much for Zhongzhi company to make our project run smoothly.

—— Mehmet Sefa KEÇİK

Technical issues resolved, reputation is very good.

—— Mr.ANTONIS GKANIS

I'm Online Chat Now
Company News
What is the hydraulic loss of a centrifugal pump
What is the hydraulic loss of a centrifugal pump?

The hydraulic loss of the centrifugal pump has impact loss, vortex loss, and friction loss along the path.

First, the impact loss.
Each pump has its own design flow. When the consumption is under the design flow condition, the flow at the inlet enters the impeller along the vane, so no impact occurs, and the outlet flow does not occur. The impact of the pump casing is then more efficient. However, when the flow rate deviates from the design condition, the liquid flow direction deviates from the direction of the blade, causing an impact.

Second, the vortex loss.
In the water pump, the flow cross-section is a very complicated spatial section. When the liquid passes here, the flow rate is too low, and the direction constantly changes, so vortex loss is inevitably generated. In addition, the vortex loss is also increased when the overcurrent surface has sharp corners, burrs, and dead water.

Third, the friction loss along the way.

Due to the roughness of the over-flow surface of the pump and the viscosity of the liquid, the frictional resistance loss occurs when the liquid swims. The following formula expresses the size of the loss;

Hm=AQ2, where A is the coefficient.

Painted on the coordinates, it is a parabola with the origin as its apex.

In the hydraulic loss of each part, the hydraulic loss in the impeller is the largest, accounting for about half of the total black and white loss; secondly, the hydraulic loss at the turn of the vane, accounting for about 1/4 of the total hydraulic loss, and the remaining 1/ 4 Hydraulic loss, loss in the impeller to the guide vane, the guide vane diffusion part, the anti-guide vane to the impeller inlet and other parts.
To reduce the hydraulic loss of the pump, the cross-section of the flow should change gently, and the speed should be reasonable. And choose the appropriate impeller, vane type, and entrance and exit placement angle. In addition, the surface finish of the overcurrent components should be increased.

Fuan Zhongzhi Pump Co., Ltd

Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Mobile: +86.137.0604.0131 E-mail:

Pub Time : 2019-04-22 09:29:54
Contact Details
Fuan Zhongzhi Pump Co., Ltd.

Contact Person: Ms. Semmy Wu

Tel: 05936532656

Fax: 86-0593-6531158

Send your inquiry directly to us (0 / 3000)