The difference between high-pressure steam cleaners and high-pressure conventional cleaners? Steam pressure washers are unique because they produce unique molecular oscillations under the combined effects of heat, humidity, impact, ionic vapor oxidation, and reduction. The hot water part that is sprayed out is directly converted into steam, and the high-heat steam directly destroys the peptide bond of the protein so that the dirt can be completely removed from the object's surface to be cleaned. The blood and oil, which are difficult to clean, are completely removed and economically. Wait.
How to clean up heavy oil stains? The hotel's flue cleaning, exhaust hood, and stove are so oily, glued to the equipment. This kind of cleaning is better than high-temperature and high-pressure cleaner. Because the current high temperature and high-pressure cleaners' work pressure is generally 200 bar, the flow rate is 900 liters per hour, the outlet temperature is about 180 degrees, and the melting oil speed is breakneck. Therefore, high temperature and high-pressure cleaners are a good choice in places where drainage is convenient, and the environmental requirements are not too high.
The working principle of the high-pressure cleaner is that the piston pump moves through a fixed seal, and a piston moves back and forth. The piston pump reciprocates by the piston so that the working volume of the pump chamber changes periodically, and the liquid is sucked and discharged. The plunger pump seal is mounted on the plunger through a smooth cylinder wall. It mainly uses the plunger to reciprocate in the pump cylinder... The piston pump moves through a fixed seal, and a piston moves back and forth. The piston pump reciprocates by the piston so that the working volume of the pump chamber changes periodically, and the liquid is sucked and discharged. The plunger pump seal is mounted on the plunger through a smooth cylinder wall. It mainly uses a plunger to reciprocate in the pump cylinder to form a volume change between the plunger and the pump wall, repeatedly pumping and discharging the liquid and increasing the pump's pressure. Plunger pumps generally have better initial use characteristics and have the advantages of high rated pressure, compact structure, high efficiency, and convenient flow adjustment. Still, their disadvantages are that they cannot operate under excessive pressure and have a short service life.
What are the methods to improve the efficiency of high-pressure industrial washing machines? When cleaning with a high-pressure cleaner, the angle is critical. If the nozzle is perpendicular to the cleaning surface, this method increases the force acting on it, but it is not easy. The object to be washed is washed away, especially the heavy, heavy oil, and the vertical surface cleaning enhances the adhesion of the oil. In fact, the correct cleaning method is to make the high-pressure cleaner closer to the surface to be cleaned so that the sprayed water should be cleaned at a certain angle to the surface to be cleaned.
Is it effective to use a high-pressure cleaner for stubborn oil? Don't worry if the oil is particularly stubborn and the cleaning effect is not good with a normal high-pressure cleaner. We also have a hot water pressure washer made of special materials. Heat resistance is excellent. It can spray high-temperature hot water. There is a heating boiler inside. The boiler heats the water temperature to produce high-temperature and high-pressure water jets. The hot water has oil and melt, so it has special effects on cleaning various equipment and stubborn oil in the pipeline.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Contact Person: Ms. Semmy Wu