The reason why the linear screw motor is hot
Let's first take a look at what is a linear screw motor. The linear screw motor is an important part of mechanical equipment, and our equipment can't work without it. But then there is a problem here, why is the linear screw motor heating? Motor heating is a normal phenomenon to a certain extent, but it is not right to exceed a certain temperature.
The linear screw motor is a special motor designed for precise position and speed control. The biggest feature of the linear screw motor is its digitality. Regarding every pulse signal sent by the manipulator, the linear screw motor works at a fixed angle under the drive of its driver. If a series of pulsed linear screw motors are received, the motor will be connected. Work for a corresponding distance.
The extent to which the linear screw motor heats up depends on the internal insulation level of the motor. The internal insulation properties are damaged at high temperatures (above 130 degrees). Therefore, as long as the internal temperature exceeds 130 degrees, the motor will not damage the ring, and the surface temperature will be below 90 degrees. Therefore, the surface temperature of the linear screw motor is normal at 70-80 degrees. Rough discriminant method: the hand can be touched for more than 1-2 seconds, not exceeding 60 degrees; the hand can only touch, about 70-80 degrees; a few drops of water quickly vaporize, then more than 90 degrees.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158