How to extend the life of the outlet pipe of a high-pressure washer
How to extend the life of the water outlet pipe of the hollow shaft motor high-pressure washer? When using the high-pressure washer, we must strictly use, maintain and maintain the high-pressure water outlet pipe of the high-pressure washer according to the relevant rules. Try not to bend and knot. Would you please not twist the high-pressure outlet pipe or step on it when the high-pressure cleaner is in operation? If it is necessary to bend because of the situation on-site, the bending radius should be as large as possible. After use, please put the high-pressure effluent management away.
Brief introduction of high-pressure pipe dredging machine: It uses ordinary high-pressure pumps to pressurize ordinary tap water to hundreds or even thousands of atmospheric pressure so that it can remove scale, metal oxides, and other attachments on the pipe wall. It generally uses diesel or gasoline as power. It has no requirements on the site and can work as long as there is water. It can clean pipes such as cylinder tiles, PVC pipes, PE composite pipes, cement pipes, cast iron pipes, etc. It is mainly used for sewage pipes in residential areas. , Slag discharge pipe, rainwater pipe, gas pipe, flue, oil pipeline, and two-phase flow transmission pipeline; special treatment can also clean the scale of heating systems, air-conditioning equipment in Central Asia, usually can also clean large buildings, buildings And the attachments on the inside and outside surfaces of the equipment can be described as a multi-purpose machine!
What mechanical equipment does the daily maintenance work of high-pressure water guns have? If you want to use it for a long time, then the usual maintenance can not be ignored, and the high-pressure cleaning machine is no exception. The daily maintenance work mainly includes
1. Check whether the inlet and outlet pipes are folded before work and are damaged. 2. Check the smooth oil level in the crankcase, and replace it every three months. 3. Check the water inlet filter for blockage frequently and clean the filter once a week. 4. Remove and clean the high-pressure oil pump once every three months.
When the steam high-pressure cleaner is stopped, please pay attention to it. The steam high-pressure cleaner is different from ordinary high-pressure cleaners, so when the machine is shut down, turn off the work switch and open the spray gun port to discharge the remaining steam. In freezing weather, press the strong drain button on the back of the machine for a few seconds to drain the accumulated water in the pipeline, then cut off the power, arrange the water pipe, and place the machine to ensure the next use.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Contact Person: Ms. Semmy Wu