how to use swimming water pump

July 3, 2019

1.Locate the pump as close as possible to the pool.

2.The pump suction line should not be smaller than the pressure line. All piping must be airtight

3.The threads on the pump must be sealed with Teflon Tape or Silicon when the pump unions are screwed on.

4.The weight of the piping should be supported independently and not carried by the pump.

5.Fill the pump tank with water before starting.

6.High suction lifts, or long suction lines, require additional time and reduce the pump's performance.

7.The water being pumped cools and lubricates the seal.

8.After the pump tank has been filled with water and the motor started, allow a few moments for the pump to start delivering water.



Fuan Zhongzhi Pump Co., Ltd


registered the trademark "ZOZHI."


Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China

Tel:+86 0593 6532656 Fax: +86 0593 6531158

Mobile: +86.137.0604.0131 E-mail: