Working principle of high-pressure washer

December 25, 2019
Latest company news about Working principle of high-pressure washer

Working principle of high-pressure washer

The working principle of the high-pressure cleaner with a hollow shaft motor: the built-in high-pressure water pump completes a process of suction and discharge of water. It sends a certain amount of water to the high-pressure pipeline to reach the high-pressure nozzle with a large amount of energy. The diameter of the high-pressure nozzle is much smaller than the diameter of the high-pressure pipe. Therefore, when the water flow reaches the high-pressure nozzle, it must be accelerated to flow out of the nozzle hole. Only in this way can the water accelerating through the nozzle holes form a jet. When the jet from the high-pressure cleaner hits the cleaning object, it is called a jet operation. When the impact force of the high-pressure water jet is greater than the dirt and the surface adhesion of the object, the high-pressure water jet will peel off the dirt and wash it away, thereby achieving the purpose of cleaning the object.

How to choose the high-pressure outlet pipe of the high-pressure cleaner? For the high-pressure outlet pipe of the high-pressure cleaner, its inner diameter must match the caliber required by the high-pressure cleaner. Mismatched regulations will affect normal use and damage the high-pressure and high-pressure outlet pipes prematurely.

Is it safe to use a high-pressure cleaner for metal cutting? When using a high-pressure cleaner for metal cutting, there is a great relationship between pressure and safety. Therefore, we must find the best equipment working pressure in the specific operation. To ensure safety. In the machining industry. When we use high-pressure washer water flow to cut, its normal pressure is generally within 500bar, far below the safe value range. Therefore, as long as we operate correctly, there will be no safety accidents.

Where and how to use the high-pressure flushing machine, please do not repeatedly turn on and off the high-pressure injection device during the operation of the high-pressure cleaning machine. Minimize the frequent operations of sudden opening and closing. This will frequently turn on the motor and will The impact of the high-pressure outlet pipe increases the possibility of damage. In addition, when the high-pressure cleaning machine is not used for a long time, it is necessary to drain the accumulated water in the water pipe and then manually bend the hose into a roll and place it horizontally to ensure better use next time!


Fuan Zhongzhi Pump Co., Ltd


registered the trademark "ZOZHI."


Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China

Tel:+86 0593 6532656 Fax: +86 0593 6531158

Mobile: +86.137.0604.0131