Seal use precautions
1. Please read the descriptions of each series before designing the groove. It is clear that the product uses the whole groove or the split groove; the process of installing the seal should pay attention to avoid the sharp edge, and the hole must be filled into the whole groove with the seal. With the installation tool, the designer should consider the parameters such as groove size accuracy, surface roughness, extrusion gap, etc. For details, please refer to the product instructions, drawings, and size tables.
2. Before installing the seal, it must be ensured that there are no impurities and cracks in the sealing groove. Apply the operating oil on the surface of the sealing groove and the seal respectively; install the seal gradually according to the sequence; avoid the Ling Rui edge and correct the seal. Avoid twisting and skewing; if it is a split slot, finally tighten the cover.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Contact Person: Ms. Semmy Wu