How to maintain the high-pressure washer
A High-pressure cleaning machine is a new type of high-pressure cleaning equipment developing fastest in recent years. It is widely used in various industries because of its low cleaning cost, no pollution to the environment, no damage to the cleaned objects, and high cleaning efficiency. However, everyone knows that even the best machinery and equipment need to be maintained, so how should the high-pressure cleaner's daily maintenance be carried out? This article mainly introduces this aspect.
First: When cleaning the hose and filter of the high-pressure washer, it is recommended to use an appropriate amount of detergent to remove the detergent residue in the high-pressure washer effectively, and pure tap water is used to supply the high-pressure washer. Strictly prohibit sand and other impurities in the water. Frequently flush the scale deposited in the inlet pipe.
Second: Connect one end of the water inlet pipe to the water inlet of the high-pressure washer, and put the other end into the bucket, connect the water source and power source, turn on the trigger of the high-pressure spray gun, and enter the working state after the air in the high-pressure pump is exhausted.
Third: To ensure that all the pressure in the hose can be released every time the high-pressure washer is used, you need to pull the trigger on the servo spray gun rod in time;
Fourth: To ensure that the high-pressure washer has a long use time, every time you use the high-pressure washer, you also need to develop a habit, that is, to remove all the hoses installed on the cleaning pump such as rubber hose and high-pressure hose, etc.
Fifth: Check the pump before supplying water to ensure a certain water pressure and flow rate. There is no rust in the water tank. The filter needs to be checked regularly to ensure that there is no blockage or damage. Take care to prevent solid particles from entering the pump and nozzles with the water pipe. The filter should be in line with the water quality. Adapt to the requirements.
Sixth: After the cleaning operation is over, rinse the hose and filter connected to the detergent to remove any detergent residue to prevent corrosion.
Fuan Zhongzhi Pump Co., Ltd
registered the trademark "ZOZHI."
Add:No.155 Shangcun Qinxiyang Industry Zone,Fuan city,Fujian,China
Tel:+86 0593 6532656 Fax: +86 0593 6531158
Mobile: +86.137.0604.0131
E-mail: sales@zz-pump.com
Website: www.zz-pump.com